qhyccd.com

EZPlnatary software user guide

QHY — Wed, 23 Jun 2010 10:16:43 +0000

English version:http://qhyccd.com/ccdbbs/index.php?topic=1869.0

Chinese version

QHY COLORWHEEL User guide

QHY — Tue, 11 May 2010 03:42:55 +0000

Writen by Gama Eelectric

QHY filter wheel Users manual

QHY9 User manual

QHY — Mon, 07 Dec 2009 10:43:41 +0000

QHY9 CCD camera user guide

QHY8 User Guide

QHY — Wed, 02 Dec 2009 14:34:15 +0000

QHY8 user manual

QHY9C color 8.3mega Cooled CCD camera Technology features

QHY — Thu, 19 Nov 2009 17:09:55 +0000

QHY9C is released in Nov,2009

Main Features
Total pixel : 3448*2574 (8.9mega pixel)
Effective pixel: 3358*2536 (8.6mega pixel)
Active pixels: 3326*2504(8.3mega pixel)
Pixel Size: 5.4um*5.4um
FullWell: 25.5Ke-
Imager Size : 17.96mm (H) x 13.52mm (V) 4/3inch
Readout noise: 8e- to 10e-(Typic @1Mpixel/s)
Preview Speed: 3Mpixel/s (3sec download time)
Download Speed: 1Mpixel/s (9sec download time)
Peak QE: 33%@blue 41%@green 33%@red
Microlensing on chip
ABG: 1000X
16bit ADC with CDS and Preamp
USB2.0 High Speed interface
Build in 32MBytes SDRAM buffer
Support Binning: No Bin(1*1), 2*2,3*3,4*4
Communication port to QHY color wheel
Improved 2-Stage TEC cooling Max -50 from ambinet
Improved Heat Sink For KODAK CCD
Build in Temp sensor and 16bit high presion ADC
DC201 DC adapter & TEC Controller, Regulated
Build in Mechanical shutter for Full Frame CCD
Build in Heater to avoid dew on CCD optic windows in very high humity
Fully Airproof with Two 4.0mm Air Socket
Weight: 510g

DC201 DC adapter & TEC controller
Single voltage Input: +12V
Output +-15V +5V to CCD
PWM TEC controller: 0V-12V to TEC
Single Cable connection with QHY9

How to set DC102

QHY — Mon, 16 Nov 2009 11:45:59 +0000

http://qhyccd.com/ccdbbs/index.php?topic=594.0

QHY5(Orion Guider) Guide Port Test Circuit

QHY — Sun, 15 Nov 2009 06:38:42 +0000

Here is a simple QHY5 guide port tester circuit . Maybe useful to test if your QHY5 guiding function works well.

The theory is : QHY5 use optic isolator, the common pin connect the GND, When guide command comes, QHY5 will pull down the level of the Guide port of EQ mount.
Most EQ mount is active when the guide port direction pin is pulled down.

Please click the Discuss forum link to see the circuit

http://qhyccd.com/ccdbbs/index.php?topic=1767.0

QHY8PRO mechanical drawing

QHY — Sun, 15 Nov 2009 06:32:18 +0000

QHY CCD distance to the sensor

QHY — Fri, 13 Nov 2009 04:31:41 +0000

Sensor sufrace glass to front

QHY5 To front : 12.5mm(M42/0.75 inner screw)
QHY6 14.5mm(M42/0.75 inner screw)
QHY9 15mm (M42/0.75 inner screw)
QHY8 6.5mm(Wihout Optic window) 19mm(With optic window M42/0.75 inner screw)
QHY8PRO 15mm (M42/0.75 inner screw)
QHY11 12.5mm (without center/tilt adjust ring) 16.5mm(with ring)QHY2PRO 6.0mm(Without optic window M42/0.75 inner screw) 14.0mm (With optic window ,M42/0.75 outer screw)
QHY6PRO 6.0mm(Without optic window M42/0.75 inner screw) 14.0mm (With optic window ,M42/0.75 outer screw)

Sensor surface to real slicon surface
Appox 1.5mm to 2mm

QHY9 mechanical Drawing

QHY — Thu, 12 Nov 2009 11:11:57 +0000

PDF files Click this link: QHY9 Mechanical Drawing