Author Topic: Problem with QHY8 fan  (Read 2077 times)


  • Jr. Member
  • **
  • Posts: 73
    • View Profile
    • Email
Problem with QHY8 fan
« on: November 30, 2009, 01:50:57 PM »
I had a little problem with fan on the QHY8 camera.. there was some smoke ::) (my mistake)

I need to buy a new one, and is this one any good?..
Or I can buy one directly from qhyccd?
« Last Edit: November 30, 2009, 01:58:27 PM by hrast »


  • Administrator
  • Hero Member
  • *****
  • Posts: 3558
    • Facebook
    • Twitter
    • View Profile
    • Email
Re: Problem with QHY8 fan
« Reply #1 on: November 30, 2009, 07:47:32 PM »

            Then fan is no sepcially spec. So you can use any 12V 80*80mm fan. But you should select low speed and low libration fan. You can also order here.

Best regards,


  • Jr. Member
  • **
  • Posts: 64
    • View Profile
Re: Problem with QHY8 fan
« Reply #2 on: December 01, 2009, 01:28:07 AM »
If you decide to get a new fan you can get one from Digi-Key, Part Number
P13571-ND, 12V @ 1.32W, 80x15mm, 2200 rpm. They are $12.

I had to replace mine and it works like the original. Remove the 4 screws on the
fan then clip the leads next to the old fan and splice in the leads from the new
fan, insulate the splice with shrink tubing. You don't have to open the camera.