EN    |   中文
QHY367C
36 Megapixel, Full Frame 35mm Format, Cooled, CMOS Color Camera

Ultra High Performance
The QHY367C uses the IMX094 full frame, 35mm format, 36 Megapixel, 14-bit CMOS sensor. This sensor is also used in the Nikon D810A camera.  It has 3.2e- read noise at lowest gain, 2.4e- read noise at unity gain (system gain = 1e-/ADU), and high dynamic range of more than 14 stops. 

True RAW Image Output
While the QHY367C has the same CMOS sensor as the Nikon D800/810A cameras, unlike these consumer DSLR cameras, the QHY367C offers True RAW Image output.  In the DSLR implementation there is a RAW image output, but typically it is not completely RAW.  Some evidence of noise reduction and hot pixel removal is still visible on close inspection.  However, the QHY367C offers TRUE RAW IMAGE OUTPUT and produces an image comprised of the original signal only, thereby maintaining the maximum flexibility for post-acquisition astronomical image processing programs.

Unique Thermal Noise Reduction Technology
In addition to efficient 2-stage thermoelectric cooling, QHYCCD employs a unique thermal noise control technology to reduce CMOS sensor noise to a very low value without affecting the integrity of the raw image.  This proprietary technology can be found to improve noise performance across the whole 165/168/247/367 product line, producing much better noise reduction than any competing camera model.

Zero Amplifier Glow
The QHY367C has zero amplifier glow no matter how long the exposure. 

128MB DDRII Image Buffer
QHY367C has 128MB DDRII image buffer to cache the image and avoid the risk of a frame loss. The image data is stored in the DDR immediately after acquisition and then transferred to computer from the memory buffer.  This avoids problems of a busy USB port when there are other peripherals using the same port as the camera.

Anti-Dew Technology
QHYCCD has more than 10 years of experience designing cooled cameras.  The QHY367C receives the benefit of that decade of design work by featuring full anti-dew technology for both CCD sensor cover glass and the sensor chamber optical window. The  QHY367C has an electric heating board for the chamber window to prevent the formation of dew and the sensor itself is kept dry with our silicon gel tube socket design for control of humidity within the sensor chamber.

AR+AR Optical Window
In order to avoid halos around bright stars the QHY367C has a AR+AR coated optical window rather than the common IR cut window for Single-Shot Color cameras.  This permits full access to the red wavelength of H-alpha and SII without attenuation by the window coating.  For RGB color balance, without passing the near IR wavelengths above 700nm, a separate removable 2-inch UV/IR filter with the desirable passband characteristics is placed in a custom filter holder in front of the camera

* Each camera is carefully calibrated at the factory with a high-precision axis measurement device.  Orthogonal placement of the sensor is guaranteed to be flat to the image plane to better than +/-20um across the sensor from edge to edge, so there is no need to adjust for camera tilt absent mechanical errors elsewhere in the image train. 








Document Download
Manual

FAQ

Other











Windows Driver and Software Download
Camera Driver
Update Check
N/A
SharpCap
SharpCap Patch
FireCapture

EZCAP_QT
AScome3InOne

Ascom guide, Ascom Capture, and Ascom 2st are all packaged into one driver called AScome3InOne, which means after you finished installing this driver, Ascom guide, Ascom Capture, and Ascom 2st would be installed on your computer.
ASCOM Platform
N/A
NativeWDM Driver
BroadCast Driver
PHD2Guiding
N/A
Mac Driver and Software Download
EZCAP_QT
FireCapture


Here is a thing you need notice,because of some reasons,this software for Mac version didn't attach a necessary library,you need add it by yourself.You can click here to download that library,and unzip it to /usr/local/lib,and if you have installed libusb library in /usr/local/lib,you don't need do this.
Linux Driver and Software Download
EZCAP_QT
FireCapture

Driver and Software Cloud Drive Download


QHY367C Specification
CMOS Sensor
SONY IMX094 COLOR CMOS
CMOS Size
36mm x 24mm full frame
Effective Pixel
7376 x 4938    36.4mega pixel
Photosensitive Area
36.0 x 24.1mm
Pixel Size
4.88um x 4.88um
Full Well
56ke-
Readout Type
Progressive Scan
Shutter
Electronic shutter
Exposure Time
60us - 3600 sec
Max Frame Rate
(for both 8bit and 14bit)
3.2FPS@Full Reolusion
7FPS@2160 LINES  (eg. 7400*2160, 4096*2160 etc)
14FPS@1080 LINES (eg. 7400*1080,1920*1080 etc)
19FPS@768 LINES
30FPS@480 LINES
40FPS@320 LINES
83FPS@100 LINES (eg.7400*100)
Pixel Binning
1x1
Peak QE
TBD
AD Convert
14-bit
Readout Noise
3.2e-@Low gain. 2.4e-@unity gain
Maxium Dynamic Range
More than 17000. >14 stops
Mechanical Interface
M54/0.75 female thread  (see mechanical drawing)
Optic window heater
Yes
TEC
2-stage TEC, -35C below ambinet
Optic Glass Window
AR+AR Clear glass
Silicon gel socket
Yes
Weight(Camera only)
788g
Power Consumption
~ 30 Watts @ 100% TEC. 13 Watts @ 50%TEC
Computer interface
USB 3.0      12V DC Power socket with lock(2.1mm)
QHY165C/168C/247C/367C with QHYOAG-M and QHY5L-II Guider Kit










   COMET 41P Captured by Gianni Fardelli with QHY367C Full Size Image Download (3.7MB)











   Bernard Loop, M78 and HorseHead Nebula Captured by Terry Hancock with QHY367C (Click image to see the larger size)











   M81, M82 and Dust Captured by Terry Hancock with QHY367C








Multiple setup solutions for QHY COLDMOS Cameras










Copyright 2002-2015 QHYCCD
   Rho Ophiuchi Captured by Gianni Fardelli with QHY367C.  Click Image to see larger image: Download 50% Size Image(2.9MB)











QHY367C Connection Combination Table Part - 1
Camera body
only
Camera 
connected with M54/0.75 female adapter
Camera
connected 
with 2-inch 
to T adapter
Camera connected with 
QHYOAG-M and 2-inch
T ring
Camera 
with 2-inch filter holder for flat field corrector solution
Camera 
connected with 
QHYOAG-M,
2-inch filter holder and flat field corrector soluiton
100093
(18±0.5)
100093
(18±0.5)
100093
(18±0.5)
100093
(18±0.5)
100093
(18±0.5)
100093
(18±0.5)

























In Standard Package
In Standard Package
In Standard Package
Need to order Optional Part
Need to order Optional Part
Need to order Optional Part


2 inch infrared
filter can be installed on the 2 inch to T adapter (M48 thread)
* This part can either be used or not used
** 2 inch infrared filter can be installed on the 2 inch to T adapter (M48 thread)
2 inch infrared filter can be installed at  the position shown in the
diagram
* This part can either be used or not used
** 2 inch infrared filter can be installed at  the position shown in the
diagram



The values in the brackets are the increment in the back focal length. Add these values together to get the total back focal length. The six-figure numbers are the unique serial numbers for QHYCCD accessories. You can find the details for these partst here:
Mechanical Part Order List
QHY367C Connection Combination Table Part - 2
QHY367C
CANON LENS
QHY367C
NIKON LENS




100093
(18±0.5)
100093
(18±0.5)


































Need to order Optional Part
Need to order Optional Part




* The two inch infrared filter can be installed at the position shown 
* The two inch infrared filter can be installed at the position shown 














The values in the brackets are the increment in the back focal length. Add these values together to get the total back focal length. The six-figure numbers are the unique serial numbers for QHYCCD accessories. You can find details for these parts here:
Mechanical Part Order List