QHY695A/IC695A -
6mega pixels 1-inch high QE astronomy CCD camera
Status: In stock

QHY695A/IC695A uses the ultra high sensitivity SONY ExView II CCD sensor ICX695. This sensor has a QE close to 80%. The readout noise is as low as 4 electron. With the two stage TEC, -45C below ambinent and the extremly low thermal noise of ccd sensor, this camera brings a clean image to you. This camera has built-in 7 position 36mm umounted filter disk or 8 position 1.25inch disk. You can fill the LRGB Ha OIII SII filters into it at one time. To compare with the five or six fitlers disk, this camera will make LRGB and narrowbanding imaging much easy. Although the sensor has electric shutter. This camera still has a mechanical shutter installed. This mechanical shutter can be used for automaticly dark frame capture. Therefor It maybe use for some funny things, like cover the light when guide error is too big to avoid the star drift during long exposure

1-inch CCD    -   ICX695
Sony ExView II sensor is well known as its low readout noise,low thermal noise and high QE. The pixel size is 4.54um and total 6mega pixels.





QHY695A/IC695A Specification
CCD Sensor
ICX695 Mono
Effective Pixels
2758(H)*2208(V),6mega pixels
Pixel Size
4.54um*4.54um
Effective Area
14.6mm(H)*12.8mm(V), Typical 1 inch
Readout Type
Full Frame CCD, Progressive Scan
FullWell
15-20ke-
ADC
16bit
Readout Noise
Typical 4e- to 5e-
System Gain
appox 0.3e/ADU
Binning
1x1,2x2,4x4
Exposure Time
1ms-10000sec
TEC
2 stage
Cooling
Typical -40C below Ambient
Shutter
Butterfly Mechanical Shutter for Dark Frame Capture
Moisture Control
Air Connector for removable silicon gel tube
Heat board for optic window of airproof CCD chamber
Built-in Filter Wheel
7 position unmounted 36mm  or  8 position 1.25inch
Peak QE
79%
OAG interface
six M3 scew holes for QHYOAG-S
Telescope Interface
M42/0.75 inner screw
Power consumption
0% cooling 8W     50% cooling 16.5W    100% cooling 27W
Back Focal Length
33mm (for standard thickness front part)
Allowed filters
36mm unmounted filter disk:  0-6mm thickness
1.25inch filter disk: Maxium:  8mm holder height(screw thread of holder not included)
Weight
1550g
QHY695A Electric Interface
USB Slave Port x1    USB host port x2    RS232 lemo 3pin port x2   2.1mm 12V DC port x2
Price(not include tax)
QHY695A with OAG   QHY814A with OAG
USD2899  (in stock at any time)
USD3499  (Produce as requestment. Require Pre-Order)


"A" Series Camera - Fully Integrated
Both QHY695A and IC695A belong to QHYCCD new "A" series camera family. "A" stands for "ALL-IN-ONE". It includes a built-in motor driven filter wheel and it natively supports the QHYOAG. The OAG can be installed on the camera solidly with six screws at minimum back focus, precious for some optical systems.
The filter wheel in QHY695A/IC695A is 7 positions for unmounted fitlers. The camera compatible with the medium size QHYOAG.
Besides the filter wheel and OAG, "A" series camera has more to offer. An internal USBHUB(2.0) provides two USB host port and a USB to dual RS232 coverter. Guiding camera, mount and electric focuser can be connected directly to this camera instead of the computer to reduce cable clutter and chance of signal loss due to the long cables. Only one USB cable to rule them all.
Butterfly Shutter - unlimited life and uniform illumenation
This camera uses a mechanical shutter looks like butterfly shape. This shutter is driven by motor directly and it is only one piece with no friction to others. The working life is almost unlimited. This shutter has two side to cover the light. One is left to open the shutter. and another is enter to close the shutter. It has a uniform illumentaion feature.


Single 12V power socket
This camera uses the single 12V to power. The power socket has the thread, it can  connect with the DC plugs with thread lock to get solid connection. There is another socket which is connected with the input in parallel. It can supply the 12V to other device nearby.


Copyright 2002-2015 QHYCCD
EN    |   中文
US$2899
Document Download
Manual

FAQ

Others








Build-in filter wheel
QHY695A has build-in 7 position 36mm filterwheel or 8 position 1.25inch filter wheel.


Driver and Software Download
QHY695A Driver
QHY814A Driver
UpdateCheck
N/A
EZCAP_QT
ASCOM Capture
ASCOM Platform
N/A
ASCOM Filters Plug
Mac Driver and Software Download
EZCAP_QT
Driver and Software Cloud Drive Download


QHY695A Reference Dark/BIAS Frames

Bias Frame  0SEC
Dark Frame 60SEC 120SEC 300SEC 600SEC 900SEC
CUSTOM Aadpters for QHY695A
QHYCCD recommends our partner, PreciseParts for ordering custom-made adapters for QHY695A and other cameras.